|
When the Industrial Hygiene Firmware is
installed the following two
separate Dosimeter measurement sets are
available for the user-selected
Industrial Hygiene Standard:
Measurement Settings
Data Displays
The
Industrial Hygiene measurements are
displayed as a Basic Data Display
(Overall display) in
four sections:
Sound
Exposure:
-
Sound Exposure Level
(LE)
for A/C/Z and S/F/I weightings
-
Sound Exposure (actual value) E for
A/C/Z & S/F/I weightings
-
Sound
Exposure (extrapolated values x2)
for (µPa2h and µPa2s)
Dosimeter 1:
-
Time Weighted
Average for X hours (LWTAX)
calculated from run time measurement
data
-
Projected Time Weighted
Average (LWTA)
calculated from run time measurement
data
-
Daily Personal Noise Exposure
(Lep,d) calculated from run time
measurement data
-
Value of Dose
for Criterion Time
based on 'Single Sample' Run Time Data
(DOSE)
-
Projected Dose
for Criterion Time based on Run Time Data
(ProjDOSE)
Dosimeter 2:
(Same as Dosimeter
1)
SEA:
Integrated 1 second
peaks that exceed 120dB
(Canada/Province of Quebec) |