|
ADP002 |
BNC to 1/4" microphone thread adaptor. Capacitance
is 6.8 pf. Used to send an electrical signal into
the 1/4" microphone preamp. Can also be used to
check system electrical noise floor by use of
included short. |
|
ADP005 |
BNC to 1/2" microphone thread adapter. Capacitance
is 18 pf. Used to send an electrical signal to a
1/2" microphone preamp. Can also be used to check
system electrical noises floor by use of included
dummy load - for all except 1" microphones. |
|
ADP006 |
Same as ADP005 except has a capacitance of 47 pf.
Typically used as dummies 1" microphones. |
|
ADP007 |
Allows the user to introduce a signal by means of a
Microdot connector into a 1/2" micophone preamp. For
use with charged coupled accelerometers. Will not
power ICP-type accelerometers. |
|
ADP008 |
1" microphone to 1/2" preamp adapter. |
|
ADP009 |
1/2" microphone to 1/4" preamp adapter. |
|
ADP010 |
Audiometer earphone testing adapter. It is a 1/4"
phone plug that "Y's" off to a 1/4" phone jack and
male BNC connector. |
|
ADP012 |
BNC to 5 pin male Switchcraft adapter for direct
input to microphone input. The user can use it to
send a direct signal into any input that has the
5-pin Switchcraft connector. |
|
ADP015 |
"T" cable. Two male 5-pin connectors to two male
5-pin connector. Splits microphone preamplifier
output signal. Requires at least one EXCXXX cable
but two are recommended. |
|
ADP019 |
1/2" microphone adapter for 1" opening in Larson
Davis
CAL250 calibrator. |
|
ADP020 |
3/8" microphone adapter for 1" opening in Larson
Davis
CAL250 calibrator. |
|
ADP021 |
1/4" microphone adapter for 1" opening in Larson
Davis
CAL250 calibrator. |
|
ADP024 |
1/4" microphone adaptor for 1/2" opening in CAL200
|
|
ADP025 |
1/2" microphone spacer for 2260 intensity probe, 25 mm
|
|
ADP026 |
1/2" microphone spacer for 2260 intensity probe, 50 mm
|
|
ADP027 |
1/2" microphone spacer for 2260 intensity probe, 12 mm
|
|
ADP028 |
1/4" microphone spacer for 2260 intensity probe, 6 mm
|
|
ADP029 |
1/4" microphone spacer for 2260 intensity probe, 12 mm
|
|
ADP030 |
1/4" microphone spacer for 2260 intensity probe, 25 mm
|
|
ADP031 |
3/8" microphone adaptor for 1/2" opening in CAL200
|
|
ADP032 |
Acoustically transparent 1/2" microphone
preamplifier clamp. Works with TRP001 tripod. |
|
ADP033 |
PRM2100K or PRM2101K to TRP003 adaptor
|
|
ADP034 |
EPS2106 to TRP003 adaptor
|
|
ADP040 |
"T" adaptor, 7-pin female LEMO to 7-pin male LEMO and BNC connectors
|
|
ADP042 |
1" to ½" short adaptor
|
|
ADP043 |
1/4" microphone to 1/2" preamp adaptor
|
|
ADP052 |
Adaptor connecting EPS2106 or EPS2107 onto TRP007 or TRP011
|
|
ADP065 |
BNC plug to RCA female adaptor
|
|
ADP066 |
1/4" Preamp holder to microphone stand
|
|
ADP067 |
PRM902/3/426 Preamp holder to microphone stand
|
|
ADP068 |
PRM900C Preamp holder to microphone stand
|
|
ADP069 |
1/4" Preamp holder to camera tripod
|
|
ADP070 |
PRM902/3/426 Preamp holder to camera tripod
|
|
ADP071 |
PRM900C Preamp holder to camera tripod
|
|
ADP074 |
ICP cable adapter for Model 831
|
|
ADP075 |
1/8" microphone adaptor for CAL200
|
|
ADP090 |
1/2" preamp-to-BNC 12 pF adapter. Similar to the ADP005, except has capacitance of 12 pF.
|
|
M2001.005 |
3/8" microphone clamp for mounting on shirt lapel. |
