|
 Model
SRC20
TheSRC20 is a powerful, value-priced digital
signal generator housed in a durable, hand-held package.
This lightweight waveform generator is ideally suited for
laboratory and field requirements. The SRC20 provides
extremely stable, and statistically repeatable source
signals used in applications such as reverberation
measurements, vibration excitation, audio system
equalization, and electronic measurements.
The SRC20 can be powered by one on-board 9 Volt battery, or
by its AC/DC power adapter. It is also supplied with a
serial interface for remote communication and control.
On-board memory allows you to store and recall up to eight
unique measurement setups. Operating the SRC20 is simple
with its intuitive menu-driven user interface.
As a Pink & White Noise Generator, the SRC 20 is capable of
generating extremely accurate, low distortion noise to
20kHz. These noise signals can also be pulsed from 1 ms to
25,000 seconds. As a Sine Wave Generator, the SRC20 offers a
frequency range from 0.01 to 25kHz. It can generate
steady-state sine wave signals, or perform linear or
logarithmic sine sweeps. The sweep time can be set from 1 ms
to 25,000 seconds. In logarithmic sweep mode, the sweep
rates can be set from 0.001 to 20 decades/second.
 |
Reverberation Measurements
|
|
|
Transmission Loss
|
|
|
Sound Insulation
|
|
|
Vibration Testing
|
|
|
Mechanical Impedance
|
|
|
Frequency Response of Audio Components & Recording Equipment
|
|
|
Hand-held, lightweight waveform
generator |
|
|
Pink and White Noise Generator - low
distortion noise to 20kHz
|
|
|
Pulse Mode - from 1ms to 25,000
|
|
|
Sine Wave Generator - Frequency range
from 0.01 to 25kHz. |
|
|
Steady State sine-wave signals
|
|
|
Linear sine sweep - 1 ms to 25,000
seconds |
|
|
Logarithmic sine sweep - 0.001 to 20
decades/second |
|
|
Intuitive, menu driven user interface
|
|
|
Memory to store and recall eight
unique measurement setups
|
|
|
RS-232 computer control
|
|
|
|
